Injectable Powder Filling Machine

Injectable Powder Filling Machine
Injectable Powder Filling Machine In India

1) Automatic Injectable Dry powder Filling with rubber stoppering machine (JDMIPF – 120)

    Model no.

  • Direction
  • Production rate
  • Fill capacity
  • Accuracy
  • Electric supply
  • Power requirements
  • Height of conveyor
  • Fill Size
  • Vial Size
  • Rubber Stopper Size
  • Air Requirements
  • Vacuum

    JDMIPF – 120

  • Left to right
  • Up to 120 Fills/Min. For single dose. Up to 60 Fills/Min. For Double dose. Up to 40 Fills/Min. For Triple Dose. Up to 30 Fills/Min. For Four dose.
  • 50 Mg to 1.5 Gm. Single dose (With help of change parts) 1.5 Gm to 6 gm. Double, Triple and four dose. Fill range depending upon vial opening and bulk density of powder.
  • ±1% Depending upon consistency and the uniformity of bulk density of injectable powder under controlled level of humidity (i.e. 25%)
  • 415 volts, 3 phase (4 wire system), 50 hz.
  • 5.0 HP
  • Adjustable from 900 to 950 mm
  • 50 mg to 6 gm
  • 5 ml to 30 ml
  • 20 mm
  • Filtered, Oil free 4 kg/cm2 provided by customer
  • 28” Hg. @ 300 LPM, provided by customer only, 500LPM recommended

Special machine are available for different size and type of container on request

Inquiry Form





2) Automatic Injectable Dry powder Filling with rubber stoppering machine (JDMIPF – 150)

    Model no.

  • Direction
  • Production rate
  • Fill capacity
  • Accuracy
  • Electric supply
  • Power requirements
  • Height of conveyor
  • Fill Size
  • Vial Size
  • Rubber Stopper Size
  • Air Requirements
  • Vacuum

    JDMIPF – 150

  • Left to right
  • Up to 120 Fills/Min. For single dose.Up to 60 Fills/Min. For Double dose.Up to 40 Fills/Min. For Triple Dose. Up to 30 Fills/Min. For Four dose.
  • 50 Mg to 1.5 Gm. Single dose (With help of change parts) 1.5 Gm to 6 gm. Double, Triple and four dose. Fill range depending upon vial opening and bulk density of powder.
  • ±1% Depending upon consistency and the uniformity of bulk density of injectable powder under controlled level of humidity (i.e. 25%)
  • 415 volts, 3 phase (4 wire system), 50 hz.
  • 7.0 HP
  • Adjustable from 900 to 950 mm
  • 50 mg to 6 gm
  • 5 ml to 100 ml
  • 20 mm, 28 mm & 32 mm
  • Filtered, Oil free 6 kg/cm2 provided by customer
  • 28” Hg. @ 300 LPM, provided by customer only, 500LPM recommended

Special machine are available for different size and type of container on request

Inquiry Form





3) Automatic Injectable double head Dry powder Filling with rubber stoppering machine (JDMIPF – 250D)

    Model no.

  • Direction
  • Production rate
  • Fill capacity
  • Accuracy
  • Electric supply
  • Power requirements
  • Height of conveyor
  • Fill Size
  • Vial Size
  • Rubber Stopper Size
  • Air Requirements
  • Vacuum

    JDMIPF – 250D

  • Left to right
  • Up to 240 Fills/Min. For single dose. Up to 120 Fills/Min. For Double dose. Up to 80 Fills/Min. For Triple Dose. Up to 60 Fills/Min. For Four dose.
  • 50 Mg to 1.5 Gm. Single dose (With help of change parts) 1.5 Gm to 6 gm. Double, Triple and four dose. Fill range depending upon vial opening and bulk density of powder.
  • ±1% Depending upon consistency and the uniformity of bulk density of injectable powder under controlled level of humidity (i.e. 25%)
  • 415 volts, 3 phase (4 wire system), 50 hz.
  • 5.0 HP
  • Adjustable from 900 to 950 mm
  • 50 mg to 6 gm
  • 5 ml to 30 ml
  • 20 mm
  • Filtered, Oil free 4 kg/cm2 provided by customer
  • 28” Hg. @ 300 LPM, provided by customer only, 500LPM recommended

Special machine are available for different size and type of container on request

Inquiry Form





4) Automatic Injectable double head Dry powder Filling with rubber stoppering machine (JDMIPF – 300D)

    Model no.

  • Direction
  • Production rate
  • Fill capacity
  • Accuracy
  • Electric supply
  • Power requirements
  • Height of conveyor
  • Fill Size
  • Vial Size
  • Rubber Stopper Size
  • Air Requirements
  • Vacuum

    JDMIPF – 300D

  • Left to right
  • Up to 240 Fills/Min. For single dose. Up to 120 Fills/Min. For Double dose. Up to 80 Fills/Min. For Triple Dose. Up to 60 Fills/Min. For Four dose.
  • 50 Mg to 1.5 Gm. Single dose (With help of change parts) 1.5 Gm to 6 gm. Double, Triple and four dose. Fill range depending upon vial opening and bulk density of powder.
  • ±1% Depending upon consistency and the uniformity of bulk density of injectable powder under controlled level of humidity (i.e. 25%)
  • 415 volts, 3 phase (4 wire system), 50 hz.
  • 7.0 HP
  • Adjustable from 900 to 950 mm
  • 50 mg to 6 gm
  • 5 ml to 100 ml
  • 20 mm, 28 mm & 32 mm
  • Filtered, Oil free 6 kg/cm2 provided by customer
  • 28” Hg. @ 300 LPM, provided by customer only, 500LPM recommended

Special machine are available for different size and type of container on request

Inquiry Form





Follow us

It is better to lead from behind and to put others in front, especially when you celebrate victory when nice things occur. You take the front line when there is danger. Then people will appreciate your leadership. Manoj Mistry


jdmpharmatech